![background image](http://html1.mh-extra.com/html/taylor-dunn/tt-416/tt-416_operators-manual_3773864034.webp)
Page 34
TT-416 Stand Up Tow Tractor
MT-416-00
To Obtain the Maximum Battery Life
Charge the battery only after it reaches a normal discharge (20%) as indicated on the Battery
Status Indicator (BSI). Failure to follow this guideline could result in the battery entering an
overcharge state, which will reduce the life of the battery. If you find it necessary to charge the
battery before it is completely discharged, we recommend waiting until it is discharged a minimum
of 30% to reduce the possibility of overcharging. Refer to Vehicle Controls in this section for
information on how to read the BSI.
Do not discharge the battery beyond a normal discharge as indicated on the BSI. Discharging
your battery too deep will result in premature failure of the battery. Refer to Vehicle Controls in
this section for information on how to read the BSI.
Check the battery electrolyte level once a week. Do not charge the battery if the battery
electrolyte is low. Charging when the electrolyte is low will damage the batteries and shorten
the life-span of the battery. Only authorized personnel should perform battery maintenance
including maintaining the battery electrolyte level. Refer to the Battery Maintenance Section for
battery maintenance information.
It is not recommended to interrupt the charging cycle. Allow the charger to turn off before
disconnecting the charger AC plug or disconnecting the battery. Interrupting the charging cycle
could lead to overcharging or discharging the batteries too deep. Both circumstances will result
in premature failure of the battery.
Charging Time
Average charging time is typically 8 to 10 hours. The time required to fully charge your batteries
will vary depending on:
•
Capacity of the battery: Higher capacity battery requires longer charge time.
•
Output of the charger: Higher charger output requires less charge time.
•
Depth of discharge: The deeper a battery is discharged, the longer it takes to charge.
•
Temperature: Low temperatures require longer charge time.
It is not unusual for charge times to exceed 15-hours, especially with new batteries.
New Battery Break In
New batteries require a break in period of up to 40-cycles. The batteries will not have their full
capacity during this break in period and may result in longer charging times.
AC Power Source
The AC power source required by the charger
will vary depending on the charger used. Refer
to the specifications provided with the charger
for details.
Use of extension cords is not recommended. If
you find it necessary to use an extension cord,
make sure the extension cord power rating exceeds the power requirements of the charger.
The United States Federal, State or local regulations may require the use of a Ground Fault
Interrupter (GFI) cable or AC outlet equipped with a GFI for charging your vehicle.
U s e o f e x t e n s i o n c o r d s i s n o t
recommended. Improper use of an
extension cord may result in fire.
WARNING
Charger Operation
There are many types of industrial chargers that may be used with this vehicle. Refer to the
documentation provided with your charger for charger operation.