![background image](http://html1.mh-extra.com/html/taylor-dunn/tt-416/tt-416_operators-manual_3773864018.webp)
Page 18
TT-416 Stand Up Tow Tractor
MT-416-00
Vehicle Controls
1: Start Switch
The Start switch turns the vehicle
electrical control system ON. This
switch may or may not require a key to
operate. Rotate the switch clockwise
to turn the vehicle system “ON” and
counterclockwise to turn the vehicle
system “OFF”. The vehicle will not run
when in the OFF position.
This switch is designed to secure and
disable the vehicle. The key can only
be removed when the switch is in the
“OFF” position.
BEFORE leaving the approved operator
position, turn the start switch OFF and
place the direction control switch in the center
OFF position.
2: Directional Control Switch
This switch determines the direction of travel
and has an indicator light on the switch. The
switch has three positions:
•
FORWARD
: Rotate the switch clockwise
to travel forward: Light will be GREEN.
•
REVERSE
: Rotate the switch counter-
clockwise to travel reverse: Light will be
RED.
•
OFF
: There is a center position between
forward and reverse, this is the “direction”
OFF position: Light will be OFF. The
direction OFF position does
NOT
turn the
vehicle control system OFF. Use the Start
switch to turn the vehicle control system
OFF. Refer to Start Switch in this section
for details regarding turning the vehicle
control system OFF.
Note: The OFF position IS NOT neutral and
does NOT disconnect the motor from
the drive train.
3: Combination Display
The gauge on the dash has many functions.
The display will cycle through the functions
while the vehicle is in operation. Some
functions may not be displayed depending
on the current situation of the vehicle. More
detail is provided on the following pages.
4: Hi-Low Speed Switch
Push on top of the High/Low switch (rabbit)
for normal speed. Push on the bottom of the
switch (turtle) for slow speed.
5: Light Switch
Push the top of the headlight switch to turn
the lights on. Push the bottom of the switch
to turn the lights off.
6: Horn Switch
Press the horn switch to sound the horn,
release it to turn it off.
Work Light
The optional overhead light bar is available
with a rear facing work light.
The switch for the work light is located on the
light bar; top right facing forward. Toggle the
switch up to turn it on and down to turn it off.
The light should be left off while vehicle is
in operation unless being used to assist in
connecting a trailer or cart..