Taylor-Dunn RE-380-36, Operator'S And Service Manual

Page: 213 / 260

Illustrated Parts
Parts Page 27
Parking Brake Linkage
Item# Part# Description QTY
1 51-344-80 Park brake lever 1
2 88-080-11 5/16NV x 1 Hex bolt 4
3 96-826-08 Brake cable 2
4 88-089-81 5/16NV Hex lock nut 4
5 88-088-61 5/16 SAE Flat washer 2
6 96-826-09 Cable lock 2
7 04-380-49 Extension, brake handle 1
8 88-527-11 Cotter pin 5
9 96-773-00 Clevis pin 5
10 96-763-00 Clevis 1
11 88-099-80 5/16NF Hex nut 1
12 00-200-48 Park brake linkage (handle to equalizer) 1
13 04-380-13 Brake cross shaft 1
14 80-410-20 Bearing 2
15 88-100-09 Hex bolt 4
88-109-81 3/8NC Hex lock nut 4
16 04-380-50 Equalizer 1
17 96-763-00 Clevis 1
18 88-099-81 5/16NF Hex nut, left hand thread 1
19 96-343-00 Rod, linkage 1
20 88-099-80 5/16NF Hex nut 1
21 96-765-00 Clevis 1
22 96-754-00 Clevis, formed 2
3/1/2008: Part numbers 41-350-72 (bracket) and 41-350-73 (plastic trim) were added to support the
parking brake arm on the rear calipers. The bracket is mounted under the arm, retained by one of the
drive mounting u-bolts. Refer to bulletin BUL-08-01-001* for details. The addition of the bracket helps
reduce brake noises. This is a temporary revision and will be in use until the brake body is updated to
provide additional support.
*-A copy of the bulletin is included on the CD provided with the vehicle. If you do not have the CD, a
copy of the bulletin may be obtained through your dealer or by contacting Taylor-Dunn.