BRAKE SYSTEM BREAK-IN
Apply only moderate braking force for the first 50 stops. Aggressive or overly
forceful braking when the brake system is new could damage brake pads and
rotors.
CVT BREAK-IN (CLUTCHES/BELT)
A proper break-in of the clutches and drive belt will ensure a longer life and
better performance. Break in the clutches and belt by operating at slower
speeds during the break-in period as recommended. Pull only light loads. Avoid
aggressive acceleration and high speed operation during the break-in period.
If a belt fails, always clean any debris from the CVT intake and outlet duct and
from the clutch and engine compartments when replacing the belt.
PRE-RIDE INSPECTION
Failure to inspect and verify that the vehicle is in safe operating condition before
operating increases the risk of an accident. Always inspect the vehicle before
each use to make sure it's in safe operating condition.
ITEM
REMARKS
PAGE
Brake system/pedal travel
Ensure proper operation
Brake fluid
Ensure proper level
Front suspension
Inspect, lubricate if necessary
Rear suspension
Inspect, lubricate if necessary
Steering
Ensure free operation
-
Tires
Inspect condition and pressure
Wheels/fasteners
Inspect, ensure fastener tightness
Frame nuts, bolts,
fasteners
Inspect, ensure tightness
-
Fuel and oil
Ensure proper levels
Coolant level
Ensure proper level
Coolant hoses
Inspect for leaks
-
Throttle
Ensure proper operation
Indicator lights/switches
Ensure proper operation
Intake pre-filters
Inspect, clean
-
Headlamps
Check operation, apply POLARIS
dielectric grease when lamp is replaced
40
Summary of Contents for G-100 2018
