![background image](http://html1.mh-extra.com/html/taylor-dunn/g-100-2018/g-100-2018_owners-manual_3763080031.webp)
SEAT
SEAT REMOVAL
Pull up on the front of the seat and slide it toward the front of the vehicle. Install
the seat by sliding the tabs into the rear of the seat base. Push down firmly on
the front of the seat until the pins are fully seated into the grommets.
SEAT BELTS
This vehicle is equipped with three-point lap and diagonal seat belts for the
operator and passenger. Always make sure the seat belts are secured for all
riders before operating. The driver’s seat belt is equipped with a seat belt
interlock. Vehicle speed will be limited to 15 MPH (24 km/h) if the seat belt is not
secured.
The center of the seat is NOT equipped with a seat belt. Never allow a
passenger to ride between the operator and passenger seats.
WARNING
Falling from a moving vehicle could result in serious injury or death. Always
fasten your seat belt securely before operating or riding in the vehicle.
To wear the seat belt properly, follow this procedure:
1. For 3-point belts, pull the seat belt latch
q
downward and across your chest
toward the buckle at the inner edge of the seat. The belt should fit snugly
across your hips and diagonally across your chest. Make sure the belt is not
twisted.
2. Push the latch plate
q
into the buckle
w
until it clicks.
29
Summary of Contents for G-100 2018
