Taylor-Dunn C0-425-48, Service And Replacement Parts Manual

Page: 19 / 128

PM Schedule
Page 19
MC-425-13
C0-425-48
Every Week
• All daily items plus the following:
• Battery electrolyte level (all cells).
• Check all tires tread for debris.
First 20 hours
• Re-torque the wheel nuts.
• Inspect all hardware for tightness.
Every Month or 100 hours
• All weekly items plus the following:
• Clean the battery terminals.
• Inspect front wheel bearings.
• Inspect trailer hitch operation.
• Inspect all safety warning labels.
Every 3 Months or 300 hours
• Re-torque the wheel nuts.
• Brake fluid level.
• Clean and lubricate motor coupler.
• Wash the battery compartment.
• Inspect all hardware for tightness (first 300 hours
then every 1,200 hours).
• Lubricate the vehicle per lubrication schedule.
• Inspect and tighten all power electrical
connections.
• Clean the drive motor exterior.
Every 6 Months or 600 hours
• All monthly items plus the following:
• Align the front end.
• Inspect all power electrical connections for
overheating.
• Clean the control panel.
• Inspect wiring for cracks, fraying, or wear.
• Inspect frame for damage.
• Inspect all steering linkages. Tighten steering
shaft coupler.
• Inspect steering king pins.
• Inspect brake pads.
• Test the batteries.
Every Year or 1,200 hours)
• All 6 month items plus the following:
• Inspect all hardware for tightness.
• Rotate tires.
• Clean and repack front wheel bearings.
• Flush and replace the brake fluid.
• Inspect suspension bumpers.
• Inspect all suspension bushings (spring, shock).
• Inspect rear wheel bearings.
• Replace throttle pedal return spring.
Every 2 Years or 2,000 hours
• All yearly items plus the following:
• Flush and replace the transaxle oil.