![background image](http://html1.mh-extra.com/html/taylor-dunn/b5-440-gas/b5-440-gas_service-and-parts-manual_823366062.webp)
Batteries
Page 62
Bigfoot G-1500
MB-440-10
ADJUST, THROTTLE / CHOKE
The choke cable is adjusted at the engine controls by
means of one cable clamp.
The throttle cable is adjusted at the engine controls by
means of one cable clamp and at the throttle pedal by
another clamp.
1: Turn the engine off and set the park brake.
2: Allow engine and exhaust system to cool.
3: Loosen the cable clamp and adjust the cable as
needed.
4: Tighten the cable clamp.
5: Reconnect the battery negative cable and test
drive.
This section is one section of a complete service
manual. Before starting any procedure, read all
warnings and instructions that are located in the
Service Guidelines chapter.
WARNING
The maximum engine RPM is controlled by the engine
governor. DO NOT attempt to adjust the governor.
Modifications to the engine governor will void the
engine warranty and may result in damage to the
engine.
NOTICE
Summary of Contents for B5-440-GAS
