![background image](http://html1.mh-extra.com/html/taylor-dunn/b0-248-36/b0-248-36_operation-t-roubleshooting-and-replacement-parts-manual_3820102110.webp)
Motor Service
Motor
Page 8
Example of freshly cut commutator
Properly undercut and cleaned
commutator segments
REPAIRING THE COMMUTATOR
1. The motor must be removed from the vehicle for this procedure. Refer to
Transmission
Service
section for information on removing the motor.
2. The armature must be removed from the motor for this procedure. Refer to
Motor Inspection-
Disassembly
section for information on taking the motor apart.
3. Using a lathe, cut the armature just enough to
remove all grooves, depressions or ridges.
4. Measure the diameter of the commutator. If the
commutator is less than the minimum diameter
specified in
Service Limits
,
then the motor must
be replaced.
5. Thoroughly clean all copper debris from between the
commutator segments.
6. Measure the commutator undercut depth in 5-places
around the commutator. If any one of the
measurements is less than the minimum undercut
depth specified in
Service Limits
, then the
commutator must be undercut.
7. While still in the lathe, smooth the commutator with
fine emery cloth.
Summary of Contents for B0-248-36
