Taylor-Dunn B0-011-00, Operation, T Roubleshooting And Replacement Parts Manual

Page: 17 / 180

SAFETY RULES AND OPERATING INSTRUCTIONS
Safety Rules
Page 7
VEHICLE OPERATIONAL
GUIDELINES
Safety Guidelines
•
Only qualified and trained operators may drive this
vehicle.
•
Drive only on level surfaces or on surfaces having
an incline of no more than 10% (5.6 degrees).
•
Drive slowly when making a turn, especially if the
ground is wet or when driving on an incline.
•
This vehicle may overturn easily if turned sharply or
when driven at high speeds.
•
Observe all traffic regulations and speed limits.
•
Keep all body parts (head, arms, legs) inside this
vehicle while it is moving.
•
Keep the vehicle under control at all times.
•
Yield right of way to pedestrians, ambulances, fire
trucks, or other vehicles in emergencies.
•
Do not overtake another vehicle at intersections, blind
spots, or other dangerous locations.
•
Do not drive over loose objects, holes, or bumps.
•
Yield right of way to pedestrians and emergencies
vehicles.
•
Stay in your driving lane under normal conditions,
maintaining a safe distance from all objects.
•
Keep a clear view ahead at all times.
Starting:
Perform all necessary vehicle preparation steps,
inspections, or maintenance before operating this
vehicle.
1. Make sure the forward-off-reverse witch is in the
center “OFF” position.
2. Set the parking brake.
3. Hold down the foot brake.
4. Rotate the ON-OFF switch to the “ON” position.
5. Release the parking brake.
6. Release the foot brake.
7. Slowly depress the accelerator pedal.
While driving:
•
Slow down and sound the horn to warn pedestrians
or when approaching a corner or other intersection.
•
No reckless driving.
•
Do not drive this vehicle on steep inclines or where
prohibited.
•
Immediately report any accidents or vehicle problems
to a supervisor.
Loading and Unloading
•
Do not carry more than the maximum number of
passengers allowed for this vehicle.
•
Do not exceed the cargo load capacity.
•
Do not load cargo that can fall off.
•
Be careful when handling cargo that is longer, wider,
or higher than this vehicle, be sure to properly secure
all loads.
Towing Loads:
• Do not exceed the towing capacity of the tractor.
• Do not exceed the load capacity of the trailer. Refer
to documentation supplied with your trailer for
information regarding load capacity of the trailer.
• Make sure all loads are securely tied down. Refer to
documentation supplied with your trailer for
information regarding attaching loads to the trailer.
• Do not back up when towing more than one trailer.
• Drive slowly when towing loads with a high center of
gravity.
• When turning, be sure to allow for “corner cutting” of
the trailer.
• Allow for longer stopping distances when towing
heavy loads.
• Allow for longer stopping distances when driving
down a grade.