Page 40
Bigfoot G-1500 Operator Manual
MB-440-09
FLUID LEVELS
Engine Oil
Taylor-Dunn does not recommend the use of oil additives.
Before checking engine oil level: Turn engine off and wait
a couple of minutes to allow oil to return to the crankcase.
The oil level should be between the F and L marks on
the dipstick (see illustration).
Only add oil if level is BELOW the L mark on the dipstick.
Only use oil displaying the appropriate American
Petroleum Institute (API) Symbol on the container.
Oil type and capacities
Petroleum or synthetic detergent oils that meet API Class SJ or higher.
1.7 to 1.9 US quart (1.6 - 1.6 liter).
Viscocity
Ambient Temperature
Viscosity
-20ºF to 32ºF
(-30C to 0C)
5W30
0ºF to >100ºF
(-18C to 38C )
10W30
50ºF to >100ºF
(10C to 38C)
SAE30
Engine Coolant
This engine is air cooled and does not require coolant.
Dipstick Range
Continuous contact with used motor oil has caused skin cancer
in laboratory animal tests. Avoid prolonged contact. Wash
skin with soap and water. Launder or discard soiled clothing.
WARNING