Page 37
Bigfoot G-1500 Operator Manual
MB-440-09
Vehicle Maintenance
Daily Inspection
The following items shall be inspected once every day before the vehicle is put into service:
•
External frame damage (body).
•
Operation of all lights and warning alarms.
•
Proper operation of all instrument panel gauges and warning lights.
•
Smooth and proper operation of seat belts (if equipped).
• Brake fluid level.
• Inspect for leaking fluids, grease, gasoline.
•
Tire tread or sidewall damage.
•
Proper operation of transmission shift lever and
starter interlocks.
•
Proper operation of adjustable seat mechanisms.
•
Smooth and proper operation of all controls such as
but not limited to:
•
Throttle pedal
•
Brake pedal
•
Parking brake
•
Steering
•
Horn
•
Etc.
•
Proper operation of all locking mechanisms such as but not limited to:
•
Hood latches
•
Cargo box’s
•
Cab doors
•
Etc.
•
Proper operation of all interlocking switches such as but not limited to:
•
Operator presence switch
•
Neutral start switch
•
Etc.
Pre-Operation Inspection
The following items shall be inspected every time before the vehicle is driven:
• Confirm all removable seat cushions are correctly installed and secured in position. .
•
Rear and side view mirror adjustments.
•
Steering operation.
•
Brake operation (service and park brake).
•
Tire pressure (visual inspection only).
•
Trailer hitch operation, latch, and wear.
The front axle wheel bearings must
be inspected and adjusted after the
first 15 hours of operation. Failure
to adjust the bearings will result in
premature failure.
NOTICE