Tavve zoneranger User Manual Download Page 313

Page: 313 / 389

listTftpFiles

listTftpFiles

zoneranger [-detail]

zoneranger

specifies the name of the ZoneRanger from which to list TFTP files

-detail

displays the size and date of each TFTP file.

listTftpFiles

lists the files in the ZoneRanger TFTP directory.

localMacs

localMacs

lists the MAC addresses on this Ranger Gateway.

mibToXml

mibToXml<

mib_file> <output_file> ]

mib_filename

specifies the path and filename of SNMP MIB file to process.

output_file

specifies the path and filename in which to store trap definitions.

mibToXml

can be used to produce an SNMP Trap definitions XML file which may be uploaded to a

ZoneRanger from the trap definitions listed in the specified SNMP MIB file.

patchinstall

patchinstall

patchfile [ -noserver ] [ -nosave ]

patchfile

Ranger Gateway patch filename as provided by Tavve Support.

-noserver

specifies to not check if the Ranger Gateway is running before installation.

-nosave

specifies to not save backup of changes indicating patch could not be removed

patchinstall

is used, under the directionm of Tavve Support personnel, to install patches on the

Ranger Gateway. This is for Linux and Solaris Ranger Gateways only.

patchstatus

patchstatus

is used to display the list of installed patches on the Ranger Gateway. This is for Linux

and Solaris Ranger Gateways only.

patchuninstall

patchuninstall

patchid [ -noserver ]

patchid

id of the patch to remove..

-noserver

specifies to not check if the Ranger Gateway is running before installation.

patchuninstall

is used, under the directionm of Tavve Support personnel, to remove a patch from the

Ranger Gateway. This is for Linux and Solaris Ranger Gateways only.

ZoneRanger 5.5 User's Guide

313

Summary of Contents for zoneranger






































































































































































































































































































































































































Search results

Summary of Contents for zoneranger

Reviews:

Related manuals for zoneranger

Brands by name

Popular brands

Tavve zoneranger, User Manual

Search results

Summary of Contents for zoneranger

Reviews:

Related manuals for zoneranger

Brands by name

Popular brands