Syntax Description
address
Hostname or IP address to ping
Usage Guidelines
Command to perform a network traceroute from the ZoneRanger to the specified device.
Example
This example shows how to traceroute device node1:
zr# traceroute node1
traffic
To configure the traffic configuration settings on the ZoneRanger. To remove a traffic
configuration setting, use the
no
form of this command
.
traffic [ forwarded | interval | log-level | proxied]
no traffic [ forwarded | interval | log-level | proxied ]
Syntax Description
forwarded
Configure the forwarded traffic thresholds
interval
Interval to check traffic thresholds ( in seconds)
log-level
Level of traffic logging on the ZoneRanger
proxied
Configure the proxied traffic thresholds
Usage Guidelines
Each of the traffic commands will take effect immediately when executed.
traffic forwarded [ all | per ] [ <cr> | notify [ <cr> [ [ total | generic | netflow | sflow | sys-
log | trap ]
threshold
] ] ]
no traffic forwarded …
forwarded
Configure forwarded threshold information for ZoneRanger
all
All traffic
per
Per IP address traffic
<cr>
Enable threshold monitoring
notify
Traffic notification and thresholds
<cr>
Enable notification if threshold exceeded
total
All traffic
ZoneRanger 5.5 User's Guide
285
