The
Displayed Columns
list is a multi-select list that limits which columns of the table are
displayed. To select multiple columns, hold down the
Ctrl
key while clicking items in the list.
Query Filter
is used to return only rows that meet specified criteria. To add criteria, click
Add
,
select the
Column Name
, and enter a
Value
. If you add multiple criteria, each row returned
from a query matches all criteria.
Values returned by a query may be links. Clicking on these links displays either the
corresponding database query results or a
Node Reports
page.
The
Reset
button may be used to set all of the fields on the page back to their original values.
Network Reports
Network reports provide a set of useful reports about specific network configuration topics. The
View >
Network Reports
page enables you to view network reports for resolved IP addresses,
resolved nodes, and devices that support SNMP.
Figure 34-82. View > Network Reports page
Viewing the Resolved IP Addresses report
The
View > Network
Reports
page
Resolved IP Addresses
tab displays two lists, one of
resolved IP addresses and one of unresolved IP addresses. The lists are built using IP addresses
captured during discovery.
During discovery, ZoneRanger uses a variety of techniques to discover IP addresses.
ZoneRanger then attempts to resolve each IP address to a hostname. Hostnames could be
resolved for the IP addresses listed in the
Resolved IP Addresses
list, but not for the IP
addresses listed in the
Unresolved IP Addresses
list.
When the
Resolved IP Addresses
report is initially displayed, the resulting report is generated
by performing a database query, and indicates which IP addresses could be resolved and which
could not as of the last time discovery was executed.
ZoneRanger 5.5 User's Guide
193
