WS7
34
Step 10:
Assembly
1.
Mount the guide pulleys J, K, M, N (49) in the brackets on the frame intended for
that purpose, using hexagon bolts M10*45 (56), washers Φ10 (5) and nuts M10 (16)
in each case.
2.
Mount the guide pulley L (49) to the frame using hexagon bolt M10*130 (22),
washer Φ10 (5) and nut M10 (16).
3.
Mount the upper pull cable end to the guide-pulley supporting frame using
hexagon bolt M10*25 (83), washer Φ10 (5) and nut M10 (16).
4.
Pull the lower pull cable end over the guide pulley J, under K, over L and under M
and N; then mount the head end on the cable (see detail drawing).
5.
Connect one end of the chain (60) to the head end of the cable using the snap
hook, and the other end to the pull bar (65).
Summary of Contents for TF-WS7-2
