WS7
39
Step 12:
Assembly
1.
Mount the six guide pulleys P, Q, S, U, X, Y (49) in the pulley mounts intended for
that purpose, using hexagon bolts M10*45 (56), washers Φ10 (5) and nuts M10 (16).
2.
Mount the two guide pulleys R, W (49) in the pulley mounts intended for that
purpose (final pulleys on the guide-pulley (42) supporting frame, see page 26), using
hexagon bolts M10*45 (56) and washers Φ10 (
5).
3.
Starting from point P, guide the pull cable (69), over the guide pulleys in the order:
P, Q, R, S, T, U, W, X, Y. The diagram on page 37 shows the sequence. The pull cable head
end should be removed, where necessary, beforehand (see detail drawing). Points T, U
can be found on the double guide pulley (66) in assembly step 11.
4.
Re-attach the pull cable head end.
5.
Mount one hexagon bolt M8*45 (62), two washers Φ8 (14) and one nut M8 (9) on
the mounts intended for this purpose on
the end of each of the two butterfly arms,
near P and Y.
Summary of Contents for TF-WS7-2
