Taurus TF-KABELZUG, Assembly And Operating Instructions Manual

Page: 14 / 36

14
Hi-Low
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Bottom Base, Upright Frame and Guide Rods
1. Attach four oval end caps (27) to the bottom base (1).
L
NOTICE
For the next steps, it can be helpful to tilt the bottom base and
mount the upright frame and guide rods sideways.
2. Attach the guide rods (3) to the bottom base (1) with one bolt
assembly (33) each.
3. Attach the upright frame (2) to the bottom base (1) with two
bolt assemblies (33).
4. Tighten the bolts.