Taurus IT10.5PRO, Assembly And Operating Instructions Manual

Page: 17 / 44

IT10.5PRO
17
Step 4: Alignment of the feet
If the floor is uneven, you can stabilize the treadmill by turning the two setting screws under the
main frame.
1. Lift the treadmill on the desired side
and rotate the setting screws under
the main frame.
2. Rotate the screws clockwise in order
to remove them and to raise the
running surface.
3. Rotate them counterclockwise in
order to lower the running surface.
Step 5: Connecting the equipment to the mains supply
࣑
ATTENTION
The equipment must not be connected to a multiple socket, otherwise it cannot be guaranteed
that the equipment will be supplied with sufficient power. Technical errors can result.
Plug the power plug into a wall outlet that complies with the instructions in the chapter on electrical
safety.