Taurus IT10.5PRO, Assembly And Operating Instructions Manual

Page: 25 / 44

IT10.5PRO
25
3.5 Additional Information
3.5.1 Changing Metric/Imperial Units
In order to change the unit of measurement used, remove the safety key then press and hold the
PROG- button and MODE button simultaneously for three seconds.
A signal will be played.
A speed value will be displayed (1 = kilometers, 0.6 = miles)
3.5.2 Calibrating the Inclince
In case of an error with the incline, a calibration can help remedy the problem.
࣑ ATTENTION
During the calibration, do not proceed with any other activites on the treadmill. Otherwise the
calibration will be incorrect.
Remove the safety key then press and hold the

button for 3 seconds.
The treadmill automatically raises to the highest position and sinks back to the lowest position.
3.5.3 Software Version Information
While in standby mode, press the +/- button for speed for one second.
The software informationen will be displayed.