Taurus Elite SESS7141, Assembly And Operating Instructions Manual

Page: 22 / 48

36 FS100-BFROOOX BASE FRAME ASSEMBL Y 1 2
10 FS100-LSFOOOX ASSY, FRAME, LEFT SIDE 1 1
14 WEIGHT STACK WEIGHT STACK, 10 LB. X 20 PLATES 1 2
33 C-757 WASHER , FLAT, l" USS 4 8
81 FSl00-GDR00l GUIDE ROD 2 4
49 FSl00-TPL000X TOP PLATE & PULLEY HOUSING ASSEMBLY 1 2
50 RX-R-C-4005 BUMPER, 26mm ID X 25mm THICK 4 8
52 XFT1002600 PULL PIN, GUIDE ROD RETAINER, 8MM X
52MM
2 4
7
Item No. Part No.
Specification
Qty. Side Qty. Machine
10
22
Functional Trainer
Step 5: Assembly of the Weight Plates
L
NOTICE
Make sure that the gym is in its final position and that there is enough space to perform exercises.
1. Remove both pull pins (52) from the frame (10).
2. Insert the guide rods (81) into the holes of the base frame (36).
3. Attach two washers (33) and two bumpers (50) on each guide rod (81).
4. Attach 20 weight plates (14) to the guide rods
(81).
5. Attach the top plate with selector bar (49) to the
guide rods (81).
6. Assemble the guide rods (81) to the frame (10)
by using both previously removed pull pins (52).
7. Repeat these steps on the other side.