24
Functional Trainer
Step 6:
Attachment of the Weight Stack Labels
1. Wipe the front side of the weights (in the area where the label will be attached)
with isopropyl alcohol.
2. Let it dry completely before proceeding.
L
NOTICE
The weight stack label contains both LB and KG designations for each plate. Note
that the designations on the label for each plate are the pull resistance at the
handle and NOT the weight of the individual weight plates.
L
NOTICE
The sheet on the backside that covers the adhesive is cut in a series of vertical
strips. DO NOT REMOVE the sheet from the area behind the center section with
the holes.
3. Before attaching the stickers of your choice, remove the corresponding adhesive
strip on the backside of the sticker.
4. Carefully align the top hole of the label with the hole in the top weight plate.
5. Align the bottom hole of the label with the hole in the bottom weight plate.
L
NOTICE
DO NOT rub the area surrounding
the individual labels.
6. Carefully press each sticker with your
finger into place.
7. Remove the surrounding area of the
stickers.
8. Press and rub the stickers until they are
firmly attached on the weight plates.
9. Let the adhesive cure for 48 hours.
Summary of Contents for Elite SESS7141
