Taurus Elite SESS7141, Assembly And Operating Instructions Manual

Page: 14 / 48

23 C 907 SCREW, 10-32 X 1/2", PAN HD. PHILLIPS, ZP 16
25 C-445 HH SCREW, 3/8"-16, 1" 4
30 C-749 WASHER, LOCK, 3/8", ZP 4
32 C-754C WASHER, FLAT, 3/8" SAE, ZP 4
35 C-900A WASHER, FLAT, #10 USS 16
36 FS100-BFROOOX BASE FRAME ASSEMBL Y 2
42 FS100-MFROOO WELDMENT, SIDE FRAME 2
86 FS100-SHDOOl SHROUD, SIDE PANEL, METAL 4
Item No. Part No. Specification Qty.
14
Functional Trainer
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Frames
L
NOTICE
Make sure that the label on the right frame faces to the outside.
1. Assemble one of the right side panels (86) to one of the base frames (36) by using two screws
(23) and two washers (35).
2. Assemble one of the the left side panels (86) to one of the the side frames (42) by using two
screws (23) and two washers (35).
3. Assemble the side frame (42) to the base frame (36) by using two screws (25), two lock washers
(30) and two flat washers (32).
4. Assemble the left side panel (86) to the side frame (42) by using two screws (23) and two
washers (35).
5. Assemble the right side panel (86) to the side frame (42) by using two screws (23) and two
washers (35).
6. Repeat these steps for the other side.