Taurus Elite SESS7141, Assembly And Operating Instructions Manual

Page: 18 / 48

86 FS100-SHDOOl SHROUD, SIDE PANEL, METAL 2
3 C-445 HH SCREW, 3/8"-16, 1" 8
4 C-659ZP FH SCRE W, 3/8"-1 6, 1-1/4", ZP, LOCK
PATCH
4
5 C-749 WA SHER, LOCK , 3/8", ZP 8
6 C-754C WASHER, FLAT, 3/8" SAE, ZP 8
7 FS100-CBROOO WELDMENT, CROSS BRACE , LOWER 1
8 FS100-CBR 100X ASSEMBLY, UPPER CROSS BRACE 1
9 FS100-CBR200 CHIN-UP BAR 1
10 FS100-LSFOOOX ASSY, FRAME, LEFT SIDE 1
11 FS100-
RSFOOOX
ASSY, FRAME, RIGHT SIDE 1
13 SERIAL TAG LABEL, SERIAL NUMBER 1
Item No. Part No. Specification Qty.
18
Functional Trainer
Step 3: Assembly of Cross Braces and Chin-Up Bar
1. Assemble the chin-up bar (9) between the left frame (10) and the right frame (38) by using two
screws (4) on each side.
L
NOTICE
Make sure that the accessory hooks of the upper cross brace show to the front.
2. Assemble the upper cross brace (8) between the side panels (86) by using two screws (3), two
lock washers (5) and two washers (6) on each side.
3. Assemble the lower cross brace (7) between the side panels (86) by using two screws (3), two
lock washers (5) and two washers (6) on each side.
࣑ ATTENTION
+ Make sure that the feet are in contact with the floor.
4. Now gradually tigthen all scews. While tightening the screws, the machine needs to be shifted
a little to facilitate the alignment of the mating surfaces.