Taurus Cable pull WS7, Assembly And Operating Instructions Manual

Page: 10 / 28

Cable pull WS7
10
Step 1: Assembly
1.Mount the front connecting tube (164) with two screws M12*30 (131), M12 spring
washers (130), and M12 washers (20) on the main frame.
2. Mount the rear connecting tube (164) with two screws M12*80 (132), M12 washers
(20), M12 lock nuts (21), and the connecting plate (128) on the main frame.
3. Mount the lateral main frame (166) with four screws M12*80 (132), M12 washers
(20), M12 lock nuts (21), and connecting plates (128) on the front and rear connecting
tube.
1.