Taurus Cable pull WS7, Assembly And Operating Instructions Manual

Page: 12 / 28

Cable pull WS7
12
Step 2: Assembly
1. Mount the guide rod (169) with two M10*70 screws (43), M10 washers (5), and M10
lock nuts on the lateral main frame.
2. Slide the cable pull roller (167) on the guide rod (169) and screw the T-shaped lock
pin (168) on it.
3. Mount the lateral standpipe (170) with M10*125 screws (133), M12 nuts (21), M12
washers (20), and the connecting plate (129) on the lateral main frame.
4. Mount the lateral angled tube (171) with M12*30 screws (131), M12 washers
(20), and M12 lock nuts (21)
on the lateral standpipe
(170) and the right cover.