Taurus Cable pull WS7, Assembly And Operating Instructions Manual

Page: 22 / 28

Cable pull WS7
22
(
*
-
,
)
+
'
Step 6: Assembly
1. Mount the flat long cable end of the cable tower (180) with M10*25 screw (52), M10
washer (5), and M10 nut (23) on point D.
2. Remove the end of the ball-shaped head on the long cable of the cable tower (180).
3. Now pull the long cable of the cable tower (180) through the points, starting from
D, in the order E, F, G, H, I, J, see cable drawing.
4. Mount the end of the ball-shaped head back again on the cable.
5. Hang nine link chains and snap hooks (60) with one end on the hand strap (85) and
with the other end on the long cable of the cable tower (180).