Taurus Cable pull WS7, Assembly And Operating Instructions Manual

Page: 19 / 28

Cable pull WS7
19
Step 5: Assembly
1. Replace the cable (70) of step 13 by the cable (179). Pull the cable (179) through the
same guiding path like in step 13. Mount the flat, short cable end of the cable tower
(179) with M10*25 screw (30), M10 washer (5), and M10 nut (23) on the lateral main
frame.
2. Mount the pulley (55) with M10*45 screw (52), M10 washer (5), and M10 nut (23).
3. Mount the pulley (55) with M10*50 screw (142), M10 washer (5), M10 nut (23), and
guide hook (177).
4. Connect the cable of the cable tower (179) through M12 washer (20) with the
mobile pulley frame (178).
5. Mount the pulley (55) with M10*45 screw (52), M10 washer (5), and M10 nut (23) on
the mobile pulley frame (178).