6
After Sales Support TEL: 1800 909 909 EMAIL: [email protected]
After Sales Support TEL: 1800 909 909 EMAIL: [email protected]
After Sales Support TEL: 1800 909 909 EMAIL: [email protected]
f. Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
5. Use and treatment of the battery operated tool
a Only use chargers to recharge the battery that have
been recommended by the manufacturer.
b. Only use the batteries designed for use in the
electric tools.
The use of other batteries may lead to
injury and risk of fire.
c. When not in use, keep the battery away from paper
clips, coins, keys, nails, screws or other small
metallic objects that may bridge the contacts.
A short-circuit between the battery contacts can lead
to burns or fire.
d. Fluid can escape from the battery when used
incorrectly. Avoid all contact with this.
In the event of
accidental contact, rinse with water. If liquid should get
into the eyes, get medical assistance. Battery fluid may
result in skin irritations and burns.
6. General safety information for battery-powered drills.
Service
a. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
7. Safety information for battery powered drills.
a. Hold the tool by the insulated handle surfaces only
when carrying out tasks during which is it possible
that the tools will come across hidden power cables
or its own cable.
Contact with a power carrying cable
can also put metal parts of the unit under pressure and
cause an electric shock.
8. Safety notes for battery/charger.
a. Keep the charger away from rain or damp
conditions.
Water entering into the charger will increase
the risk of an electrical shock.
b. Only use chargers recommended by the
manufacturer to recharge the battery.
There is a risk
of fire if it is used with other batteries.
c. Never use to recharge third-party batteries.
The
charger is only designed to charge the supplied batteries
(Li-Ion) using the voltages specified in the Technical Data.
Otherwise there is a risk of fire or explosion.
d. Keep the charger clean.
Contamination will increase
the risk of an electrical shock.
e. Check the charger, cable and plug each time you
use the unit. Do not use the charger if you find any
damage. Never open the charger up yourself, have
it repaired by a qualified specialist only and with
original replacement parts.
A damaged charger, cable
or plug will increase the risk of an electrical shock.
f. Never operate the charger on a surface that will
burn easily (for example, paper, textiles etc) or in
a flammable environment.
There is a risk of fire
occurring as a result of the heat generated during the
charging process.
