After Sales Support TEL: 1800 909 909 EMAIL: [email protected]
After Sales Support TEL: 1800 909 909 EMAIL: [email protected]
7
After Sales Support TEL: 1800 909 909 EMAIL: [email protected]
g. Fluid can escape from the battery when used
incorrectly. Avoid all contact with this. In the event of
accidental contact, rinse with water. If liquid should
get into the eyes, get medical assistance.
Battery fluid
may result in skin irritations and burns.
h. Do not open the battery.
There is a risk of short-
circuiting.
i. Protect the battery from heat, for example, from
constant sun and fire.
There is a risk of explosion.
j. Never short circuit the battery.
There is a risk of
explosion.
k. In the event of damage and incorrect use, vapours
may come out of the battery.
Ensure your work space
is well ventilated with fresh air and, if you have any
symptoms, consult a doctor. These vapours may irritate
the respiratory system
Safety rules for cordless drill/drivers
a)
Hold tool by insulated gripping surfaces when performing
an operation where the drill bits may contact hidden
wiring or its own cord. Contact with a “live” wire will make
exposed metal parts of the tool “live” and shock the
operator.
b)
Always wear safety goggles or eye protection when using
this tool. Use a dust mask or respirator for applications
which generate dust.
c)
Secure the material being drilled. Never hold it in your
hand or across legs. Unstable support can cause the drill
bit to bind causing loss of control and injury.
d)
Position yourself to avoid being caught between the tool
or side handle and walls or posts. Should the bit become
bound or jammed in the work, the reaction torque of the
tool could crush your hand or leg.
e)
If the bit becomes bound in the workpiece, release the
trigger immediately, reverse the direction of rotation and
slowly squeeze the trigger to back out the bit. Be ready
for a strong reaction torque. The drill body will tend to
twist in the opposite direction as the drill bit is rotating.
f)
Do not grasp the tool or place your hands too close to the
spinning chuck or drill bit. Your hand may be lacerated.
g)
When installing a drill bit, insert the shank of the bit well
within the jaws of the chuck. If the bit is not inserted deep
enough, the grip of the jaws over the bit is reduced and
the loss of control is increased.
h)
Do not use dull or damaged bits and accessories. Dull
or damaged bits have a greater tendency to bind in the
workpiece.
i)
When removing the bit from the tool avoid contact with
skin and use proper protective gloves when grasping the
bit or accessory. Accessories may be hot after prolonged
use. Check to see that keys and adjusting wrenches are
removed from the drill before switching the tool on. Keys
or wrenches can fly away at high velocity striking you or
a bystander.
j)
Do not run the drill while carrying it at your side. A
spinning drill bit could become entangled with clothing
and injury may result.
WARNING!
Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities contains
chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
a)
Lead from lead-based paints,
b)
Crystalline silica from bricks and cement and other
masonry products, and
c)
Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks
that are specially designed to filter out microscopic particles.
