87
PD / PCA / PCA PLUS - Rev. 01 - Jun/22
Oil reservoir assembly
1. Assemble the reservoir support (A) on the right frame (B) using bolts (C), flat washers
and nut; some frame models may leave the factory with a welded reservoir support.
2. Lock the reservoir (D) on the support (A) using bolts (E), spring and flat washers.
3. Remove the return filter (F) and place the pipe fitting (G) on the reservoir. Before
replacing the filter, apply a fine layer of hydraulic oil on the seal and assemble it
again tightening using your hand.
F
F
G
G
B
B
D
D
A
A
C
C
E
E
5. Assembly