29
C
A
B
D
E
G
H
I
J
L
F
K
ASSEMBL
ASSEMBL
ASSEMBL
ASSEMBL
ASSEMBLY
Y
Y
Y
Y
Mounting the Leveling Control Assembly
- Place the flatwasher (A) in the crank (B).
- Place the spring (C), soon after place the other flatwasher (D).
- Place the guide of the crank (E) in the bell crank (F), that should already be
set up in the harrow.
- Pass the crank (B) in the guide's hole (E), place the other flatwasher (G).
- Place the other spring (H), with the last flatwasher (I), also place the nut (J) into
the crank (B).
Insert approximately 50 mm of the crank (B) in the adjustment bar (K) and place
the roll pin (L) in the hole of the extremity of the crank (B) through the hole of the
extremity of the adjustment bar (K). See the leveling control adjustment in the page
39.
Mounting the
Stabilizer (Turnbuckle)
- Place the turnbuckle (M) joining
the offset bar to the bell crank and lock
with the cotterpins. See the adjustment
of the turnbuckle in the page 36.
M
