24
ASSEMBL
ASSEMBL
ASSEMBL
ASSEMBL
ASSEMBLY
Y
Y
Y
Y
Mounting the Scrapers
Observe the scrapers positioning
with the downwardly extremity facing to the disc blades concavity.
Set up the scrapers (C), through the bolts (D), and flat washers, that are placed
underneath the mounting plate. On top, place the spring washers and nuts.
Note: - THE SCRAPERS ARE ADJUSTABLE TO APPROACH OR TO DISTANCE THEM FROM
THE DISK BLADES. SET-UP THE DISTANCE FOR 0,5 TO 1,0 CENTIMETER.
C
C
D
Obs.: FOR GCRO 52 AND 56 WITH
FOLDING WINGS, THE BOLTS
WHICH FIT THE SCRAPERS ON END
OF EACH CENTER GANG
CARRIER, THE BOLTS MUST BE
ASSEMBLED AS PER PICTURE. (SEE
DETAILS ON PAGE # 30).
