23
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GNLCR
Adjustments and operations
Cutting depth adjustment
The cutting depth is adjusted by the
following points:
1) Hydraulic cylinder.
Use the rod stops (A) on the
hydraulic cylinder rod (B) so the tires
can work as depth limiters.
2) Disc gang opening.
Increase the opening angle between the gangs to work in soils with greater difficult
to penetrate the disc blades. In light and loose soils, the opening angle must be smaller.
This adjustment is done by changing the fixation of the disc blade carrier chassis in
the main frame.
• To start the harrowing, we recommend an average disc gang opening.
If a bigger penetration is necessary, increase the opening angle of
the rear gang.
• The front gang usually does not work with a greater opening than
the rear gang.
IMPORTANT
B
A
Front gang
Rear gang
Greater depth
Smaller depth
Smaller depth
Greater depth
Summary of Contents for GNLCR
Page 1: ...INSTRUCTIONS MANUAL GNLCR ...
