44
GNALCR - Rev. 04 - Mar/23
6. Set-up instructions
Hitching to the tractor
B
B
C
C
D
D
WARNING
• The hitch feature a cable (D) for
holding it when coupling the equipment
to the tractor.
Important recommendations
1 cm
1 cm
The spring spindle must be adjusted leaving 1 cm (one centimeter) of thread on
the spindle, above the nut and counternut. Keep this adjustment during working and
transportation.
Lower the disk harrow until the disc gangs are supported on the soil. Adjust the nuts
on the spindle until it touches the spring support, without compressing it. Doing so, it will
be properly adjusted for working and transportation.
Before starting working, check the conditions of all parts and retighten nuts and bolts,
especially the ones fastening the disc gangs. If the disc gangs work loose, they may damage
the axles and other fixation components.
