8
GNALCR - Rev. 04 - Mar/23
An inadequate maintenance and conservation may compromise the safety operation
of your equipment:
- It is important to follow the verification deadlines or periodic inspections;
- Carry out the operations described on this manual;
- Before carrying out any inspection or maintenance, stop the equipment on a leveled
place and prevent it from moving;
- If it is necessary to carry out any welding operation on the equipment, establish the
ground connection as close as possible to the welding point;
- Wash the whole equipment using a low-pressure spray of water to remove the dirty
grease and the earth that accumulates on the corners.
• Transportation over long distances must be done on a truck or trailer.
Attention: to transport over truck or trailer, follow the procedures on this manual. Have
extreme caution and use every necessary safety locks to preserve your physical integrity
and the integrity of any people nearby.
This equipment was designed according to its technical state and following every safety
procedure. However, the equipment may be harmful to the life and physical integrity of the
operator or third parties, and also there may be damages to the equipment itself or to any
other assets.
Read and follow the warning signs before operating with the equipment.
2. To the operator
WARNING
Safety and accident prevention
Correct use
Conservation and maintenance
The GNALCR disk harrow executes a complementary harrowing job to prepare the
soil, breaking clods evenly and leaving it in the proper condition for the seeders, facilitating
the application of herbicides and the mechanized harvest.
The correct utilization includes the knowledge and observation of the warnings and
instructions available on this manual, being necessary to follow the maintenance intervals,
technical information and working area definition.
