76
GAPCR-HD 8013/GASPCR-HD 9017/GASPCR-EHD 10020 - Rev. 05 - Sep/22
Mechanical stabilizer bar set
1. Couple the stabilizer (A) to the drawbar articulator (B) using a bolt (C), flat washer
and nut and to the stabilizer bar (E) articulator (D) using a pin and cotter pin (F).
Fasten the other end of the articulator (D) on the frame using a pivot axle (G), flat
washer and nut.
2. Fasten one end of the stabilizer bar (E) to the articulator (D) using a pin and cotter
pin (H). Lock the other end to the wheel support (I) using a bolt (J), flat washer and
nut.
5. Assembly
Frame
Frame
K
C
B
E
B
L
D
A
B
F
H
E
G
E
J
I
NOTE
- The drawbar articulator (B) is fastened to the hitch bar (K) using a bolt (L), castle
nut and cotter pin. When fastening it, make sure to not overtighten the nut to lock
the set, so the drawbar will be free to articulate.
