104
GAPCR-HD 8013/GASPCR-HD 9017/GASPCR-EHD 10020 - Rev. 05 - Sep/22
1. Retighten nuts and bolts after the first day of work and check the conditions
of all pins and cotter pins. Then, retighten every 24 operating hours.
2. Carefully observe the lubrication intervals.
3. Special attention should be given to the disc gangs, retightening daily during
the first week of use. Then, retighten periodically.
4. Choose a gear that allows the tractor to maintain certain power reserve,
ensuring against unforeseen efforts.
5. The tire inflation must be done with the aid of a contention device (tire
inflation cage).
6. The tire inflation is important; keep the inflation according to the 'tires inflation'
page on the 'maintenance' section.
7. Speed is relative to the tractor gear and can only be determined by local
conditions. We adopted an average 5
to 7 km/h
, which is not advisable to
overcome to maintain service efficiency and avoid possible damages to the
equipment.
8. It is important to maintain a constant speed during the whole operation.
9. Only people who own a complete knowledge of the tractor and equipment
must operate them.
10. Be on a wide field and maneuver on slow gear to hitch the equipment, being
ready to brake when necessary.
11. Remove pieces of wood or any object that may attach in the disc blades.
12. The tractor drawbar must remain loose during working and transportation
.
13. Only pull the disk harrow using a tractor with enough power.
14. During working or transportation, the presence of passengers on the tractor
or equipment is not allowed.
8. Adjustments and operations
Operations - important points
