TATA Motors TIGOR EV 2021, Owner'S Manual

Page: 172 / 236

164
Continue to raise the jack slowly and
smoothly until the tyre clears the ground.
Do not raise the vehicle more than re-
quired.
Lifting the rear wheel using jack
Lifting the front wheel using jack
Remove wheel nuts with the help of wheel
spanner and take out flat tyre.
Roll the spare wheel into position and align
the holes in the wheel studs.
Tighten each nut by hand until the wheel
is securely seated on the hub.
Lower the jack completely then tighten the
wheel nuts one by one using wheel span-
ner.
Press fit the wheel cover back (if fitted).
Restore all the tools and jack at their re-
spective locations.
Place the flat tyre at spare wheel location.
WARNING
If you do not position the jack correctly
at the appropriate jacking point of the
vehicle, the jack could tip over with the
vehicle raised. There is a risk of injury.
Also jack can be damaged.
NOTE
Do not place wheel nuts in sand or on a
dirty surface. Do not apply oil or grease
on it.
NOTE
Do a check and correct the tyre •
pressure and wheel nuts tightness
of the changed wheel at nearest au-
thorized service station. Get the flat
tyre repaired at the earliest.
Place the jack only at recommended •
jacking locations.
EMERGENCY AND BREAKDOWN ASSISTANCE