44
POWER STEERING
Power steering pump belt tension Check
Check the conditions of belts on the engine. Examine the
edge of the belt for cracks or fraying.
Check the tension of the belt by pushing on it with your
thumb Alternator/Power Steering belt as shown in
schematic diagram.
The belts should have deflection of 8 to 10 mm.
If the belt tension is not proper, get it attended at the nearest
Authorised service outlet.
Schematic Diagram - Power steering Belt Arrangement
TENSION
ADJ. BOLT
TENSIONER
ALTERNATOR
PULLEY
POWER STEERING
PUMP PULLEY
H A N D L I N G
45
H A N D L I N G
Air Conditioning (If fitted)
A. Temperature Control Knob :
The air temperature in the vehicle can be controlled by
operating the temperature control knob (A) at the left hand
side of the control panel. The temperature can be increased
by rotating the knob clockwise and decreased by rotating it
anti-clockwise.
B. Blower Speed Regulation Knob :
The ventilation system has a four speed blower. The blower
speeds can be regulated to any one of the following speeds
by operating the knob (B) at the centre of the control panel.
LOW MEDIUM HIGH VERY HIGH
C. A.C. ON/OFF Switch :
The A.C. Can be switched ‘ON’ by pressing the switch (D) on
the A.C. Control panel provided the blower is ‘ON’ and the
engine is running. The indicator lamp will show that the
A.C. Is ‘ON’.
D. Air vents
Four air vents having provision to adjust air flow in the
desired direction, are provided on the dashboard. The air flow
can be adjusted continuously by adjustable vents on the
dash board. The direction of the air flow can be also adjusted
similarly.
A. Temperature Control Knob
B. Blower Speed Regulation Knob
C. AC ON / OFF Switch
D. Air Vents on Dash Board
D
Air Conditioning Controls
A
B
C
AIR-CONDITIONING
Ofrecido por www.electromanuales.com
