TATA Motors Safari 2021, Owner'S Manual, Page: 120 / 308

112
Do’s And Don’t
Dos:
Please ensure that the phone is com- 1.
patible to the charging standard “Qi”.
If there is any metallic object between 2.
smartphone and wireless charger pad,
immediately remove smart phone and
metallic object after it has completely
cooled down. Once any metallic object
is detected on wireless charger post
charging it displays its warning mes-
sage on Infotainment unit, first remove
smart phone then remove foreign ob-
ject from the charging pad and place
the smart phone again on charging
pad.
In case of water/Liquid spillage on 3.
charging pad, dry out the pad surface
area properly & clean the ECU surface
area by removing Anti-skid mat. Do not
charge the smart phone until surface is
completely dry.
The Phone charging status is informa- 4.
tion by phone and not charger.
Wireless charger works on principle of 5.
magnetic induction, i.e. it converts
electrical energy into magnetic energy
to transfer energy from charging pad to
phone. Please maintain safe distance
from the charger most of the time as it
may cause irritation to sensory organs
or active implants if implemented in the
body. Please consult medical specialist
in case implant organ in the body of
the user.
Place the smart phone on the center of 6.
the charging pad for effective charging
with best results (refer Figure 1).
It is recommended to turn on Engine 7.
while charging phone on wireless
charger to avoid vehicle battery drain.
User shall clean charging pad/mat pe- 8.
riodically to avoid dust accumulation.
It is recommended to keep Vehicle AC 9.
at least 23 Deg Cel with Fan speed
above 2 level as cool environment sup-
port efficient charging of the phone.
It is recommended to keep mobile 10.
phone at center of charging pad for ef-
fective charging. In case small phone
kept at corner do not start charging or
Foreign object detection message
pop-up, please move phone to center
1. If any metallic object such as
coin/keys are located between wireless
charging pad and phone back cover,
the charging may get disrupted. Also,
this may results in heat up of metallic
objects.
WARNING
DASHBOARD AND FEATURES