Step 3 -
Attach base frames
Unfurl the lattice base frames.
Fit the lattice base frames between the
bed rails.
To secure the frames, stretch the first and
last slat of the over the corresponding dowel
pins
Repeat this step for all remaining sides.
base frame over the dowel pins.
Do not cut the
fabric webbing
Step 4 - Insert cap screws
Hardware needed
IMPORTANT SAFETY STEP
Fit the small cap screws to the 4
remaining unused locating holes
(2 on each bed head).
This is a
required safety step to prevent
x4
4 x 15mm cap screws
12
Note:Do not cut the fabric webbing
that holds the slats together
Stretch the first and last of the
the entry of small fingers into these holes.