6. Administrate configurations
Operation Manual Version 1.6
49
6.2. Load Setup
Use this function to load a saved setup. The setup file will be first reviewed, if the setup and the connected
device match together. Following cases can come up:
The saved setup and the
channel number and as well
the serial number of the
channels met together: The
setup will be transferred to the
connected device(s) and all
channel fit together as before.
The saved setup does NOT
match with the number of
channels or devices or channel
serial numbers: The software
offers the possibility to load
the setup, too. If you confirm,
the setup will be loaded in the
sequence as the devices was
first recognized by the
computer. That means at a
multi device configuration, the
sequence of channel configurations can be different as expected!
In the first case the setup will be loaded without interruption. In the second case some additional dialogs can
popup, which remind you that the number of channels or serial numbers does not match.
Load setup (Hotkey
F3
)
Advice
: Please do not load setup files, which are configured by other software. Please try not to modify setup
files by Hex editors or similar.
