3. First steps
Operation Manual Version 1.6
21
3.3. Menu point View
The view of the
preAmpLTT
software depends, if a LTT500 universal amplifier was connected with the computer
and found by the software or not.
Pic.3: Menu point „View“
Home:
This view is always available and enables a central control of all important functions.
Channel Control:
Is only available, if at least on LTT500 device is found by the software. At this view, all settings
of the channels can be done.
Log view:
This view is always available and gives an extended view on the system and device information.
In the chapter
Operation concept
, you will get a detailed introduction in the elements of
channel control
.
During the daily work with
preAmpLTT
you can all the time change the view between
Home
,
Channel Control
and
Log view
. Please take care that f.e. the channel status information, like over range or cable break, is only
available in the Channel Control view.
At the normal operation, it is not necessary to change the view. The software decides by its own, which view is
necessary, depending if a LTT500 hardware was found or not.
