29
Establishing a Wi-Fi Connection (Wi-Fi Optional)
The MT880 supports wireless communication with a built-in Wi-Fi card for 802.11b/g/n WLAN.
It is possible to use the WiFi Utility to set up or modify the Wi-Fi settings through the following
steps:
NOTE:
Wi-Fi access requires a separate service contract through a wireless service provider.
Contact a wireless service provider for more information.
Unitech terminals come with built-in RF facility. This chapter guides you through the RF setting.
1. Tap the wireless network icon as a shortcut on the desktop.
2. Move to
Wireless Information
, and tap
Add New
or double tap a
preferred network.
3. Enter a Network Name (SSID) and a Network Key. For the detailed
instruction on wireless network encryption setting, please visit Microsoft
website. Then, tap OK.
4. The network icon appears on the taskbar when the RF is connected.
IP Address Setup
The MT880 automatically detects WLAN module during the first installation. Set the IP address
through one of the following methods:
Obtaining an IP Address via Dynamic Host Configuration Protocol (DHCP) Server.
Specifying an IP Address.
Obtaining an IP Address via DHCP Server
Make sure a DHCP server is available in the LAN environment before trying to obtain the IP
address through a DHCP server.
1. Tap
Start
→
Settings
→
Network and Dial-up Connections.
NOTE:
Tap
Start
→
Settings
→
Control Panel
→
double-tap
Network and Dial-up Connections.
2. Double-tap SMSC95001.
3. Tap the radio button next to
Obtain an IP address via DHCP
and then tap OK.
