30
Specifying an IP Address
If no DHCP server is available, assign an IP address to each MT880 through the following:
1. Tap
Start
→
Settings
→
Network and Dial-up Connections.
NOTE:
Tap
Start
→
Settings
→
Control Panel
→
double tap
Network and Dial-up Connections.
2. Double-tap SMSC95001.
3. Tap the radio button next to
Specify an IP address. Input the
proper IP address, Subnet Mask
and Default Gateway.
4. In the Name Servers tab, input
the proper Primary DNS:,
Secondary DNS:, Primary WINS:
and Secondary WINS:. Tap OK.
NOTE:
To avoid conflict with the Local Area Network environment, consult an MIS department
for the correct Transmission Control Protocol / Internet Protocol setting.
