24
Basic Operations
6
Operating Modes
The AXON Flex system has two operating modes:
1
BUFFERING
2
EVENT
BUFFERING Mode
BUFFERING mode is the default mode of operation, and is activated a few seconds after turning on the controller.
The camera must be attached to the controller system in order for it to capture video in BUFFERING mode.
If the
camera is not connected to the controller, you will not capture any video.
When BUFFERING begins:
t
The Operation LED on the controller will blink green.
t
The camera will be capturing video but no audio, and will not record to permanent memory while in
BUFFERING mode.
t
Buffered video duration is up to 30 seconds (00:00:30).
When you activate the EVENT mode, the buffered video (not audio) captured directly before the event will be
saved and attached to the event in permanent memory. This feature is intended to capture the video of an
incident just before your activation of EVENT mode.
Because the system does not capture audio in BUFFERING mode, the first 30 seconds of a recorded event
will be video-only. Buffering mode starts only after the AXON Flex controller is turned on. The system
does not record when the controller is turned off.
EVENT Mode
To record an event or incident, double-press the EVENT button on the controller to activate the EVENT mode.
When EVENT mode is activated, the “buffered” video directly preceding the event will be saved and attached to
