51
Audio Prompts
12
The AXON Flex system emits beeping sounds called audio prompts to notify you of the system status. These
audio prompts usually occur after you perform an action with the AXON Flex system.
NOTE: The camera must be connected to the controller for audio prompts to be heard. If the camera and
controller are connected and you still do not hear the audio prompts, check the camera’s volume.
Action
Audio Prompt
Turn the Controller On.
One Beep
Double-Press the Event Button to Start the Event
Mode.
Two Beeps
The System is Recording.
Two Beeps Sound Every Two Minutes
Press the Battery Button while the Camera is
Recording.
Two Beeps
Press and Hold the Event Button to Stop
Recording.
One Beep
Turn the Controller Off.
One Beep
The Battery is at 20 Percent Capacity or Lower.
Four Quick Beeps
The System is in Buffering Mode.
No Beeps
Cable Disconnect (The Camera Will Shut Down).
One Beep.
