Tascam Portacapture X6, Owner'S Manual

Page: 28 / 36

3. Tap MIC or numbers 3 to 4 to turn the recording
tracks on/off.
Input setting
Gain level
Recording
track on/off
status
Tracks shown with red backgrounds will be
recorded.
4. Slide the track GAIN faders to adjust their
input levels.
While watching the level meters, adjust the
GAIN faders until the highest that the meters
reach is about −12 dB.
NOTE
If the input level exceeds –2 dB, the PEAK
indicator on the unit will light.
Procedure 4: Start recording
1. Press the REC [
0
] button on the unit to start
recording.
When recording starts, the REC indicator will
become lit.
2. Press the HOME [
8
] button on the unit to
stop recording.
When recording stops, the REC indicator will
become unlit.
Procedure 3: Set the mixer
1. Tap MIXER at the right of the screen to open
the MIXER screen.
2. Slide the faders of each track to adjust the
balance of levels sent to the MASTER.
MASTER
level
MASTER level
setting
PAN setting
Fader
o
If an input level is too low the recorded sound
will be quiet, but if it is too high the sound will
be distorted (or break up).
28
TASCAM Portacapture X6