12
TASCAM iU2
Connecting with an iOS device
Set the HOST switch on the bottom panel to iOS DEVICE
before connecting an iOS device to the unit.
Next, remove the dock connector cable from its storage
compartment and connect it to the iOS device. To provide
power, connect a USB recharger to the unit as shown bellow.
When the unit is connected to a USB recharger using a USB
cable, the iOS device connected to the dock connector cable
can be recharged.
USB (for power supply)
Dock connector cable
iOS device
USB
recharger
CAUTION
In order to recharge an iOS device, you must connect the
•
device to the dock connector cable before connecting the
USB cable.
Only connect the genuine Apple USB recharger that came
•
with the connected device or one that is sold by Apple for
the device to the USB port on this unit.
If the connected device has an “Airplane Mode” setting, set
•
it to “ON”.
Connecting with a computer
Set the HOST switch on the bottom panel to COMPUTER
before connecting the unit to a computer.
Use a USB cable to connect this unit to the computer as shown
in the illustration.
USB
Computer
3 – Connections
