8
TASCAM iU2
Top panel
1
MON MIX knob
Signals input through the unit’s jacks (from the INPUT L
jack or jack and the INPUT R jack) and by USB from the
computer are mixed together and output from the LINE
OUT L/R jacks and jack. Use this knob to adjust the
balance between these signals. Turn the knob all the way
to the left (COMPUTER) to output only the signal input by
USB from the computer output or all the way to the right
(INPUT) to output only the signals input through the unit’s
jacks.
2
LINE OUT knob
Use this to adjust the level output from the LINE OUT L/R
jacks.
3
Overload indicator (L)
This lights red just before the signal input through the left
input channel (L) reaches a level that distorts. This indicator
only works with analog input. It lights red when the
maximum level exceeds –2 dB.
4
Phantom power indicator (48V)
When the bottom panel PHANTOM switch is ON, the 48V
indicator lights red.
NOTE
If the INPUT L or INPUT R switch is set to LINE or GUITAR,
phantom power will not be supplied to that input even when
this indicator is lit (PHANTOM switch set to ON).
5
INPUT L knob
Use to adjust the input level from the INPUT L or jack.
6
PHONES knob
Use to adjust the jack output level.
CAUTION
Before connecting headphones, minimize the volume with the
PHONES knob. Failure to do so could result in sudden loud
noises that might damage your hearing or cause other harm.
2 – Names and Functions of Parts
